Brands
- AC
- ACA
- AMC
- Applied Test System
- Aro Scientific
- ASI Standard
- Cerulean
- Conidia
- Emcee
- Emco
- PAC
- PCS
- Phase Technology by PAC
- Pnshar
- PolyScience
- PulMac
- Regmed
- RISE
- Scavini
- Spectro Scientific
- Sundy
- Thwing Albert
- Tobias
- USON
- Vived Management JB
- Zematra
- Products
- Thwing Albert
- Friction and Peel Tester
- Products
- Thwing Albert
- Friction and Peel Tester
Friction and Peel Tester

This Coefficient of Friction Tester (COF) / Peel Tester can measure the static and kinetic coefficient of friction as well as run seal strength tests, 180° peel, 90° peel, and T-peel tests. The FP-2260 also offers a tensile test mode to perform lightweight tensile tests up to 10 kg (22 lbs).
Plastic film, paper, paperboard, adhesives, labels and packaging materials are ideally tested with the FP-2260
- Specification
- Standard
- Model
-Automatic load cell recognition
– Interchangeable .5kg, 1kg, 2kg, 5kg and 10kg load cells
– Force Resolution: 0.1g for all load cells
– Force Accuracy: 10% to 100% load capacity: ±0.25% of measured value
Less than 10% load capacity: ±0.025% of Load Cell Capacity
– Adjustable crosshead and load cell (Vertically and Horizontally)
– Automatic Return of the crosshead
– Standard Speed: 1 to 20 in/min (25.4mm to 508mm/min)
– Test Times: 0.1 to 99 seconds- Variable for COF, and Peel
– Travel Distance: 0.1 to 14.0 in (0.3 to 38 cm)
– Selectable force units [g, kg, lbf, oz, N]
– Store 128 tests each for COF, Peel and Tensile
– Heated Platen for testing at elevated temperatures up to 400° F (option)
– Available test area 225mm x 350mm
– Electronic over travel switches
– Preset industry-standard test method storage
ASTM D1894, D4521, D3330
TAPPI T816
ISO 8295
FP-2260
- Specification
- Standard
- Model
-Automatic load cell recognition
– Interchangeable .5kg, 1kg, 2kg, 5kg and 10kg load cells
– Force Resolution: 0.1g for all load cells
– Force Accuracy: 10% to 100% load capacity: ±0.25% of measured value
Less than 10% load capacity: ±0.025% of Load Cell Capacity
– Adjustable crosshead and load cell (Vertically and Horizontally)
– Automatic Return of the crosshead
– Standard Speed: 1 to 20 in/min (25.4mm to 508mm/min)
– Test Times: 0.1 to 99 seconds- Variable for COF, and Peel
– Travel Distance: 0.1 to 14.0 in (0.3 to 38 cm)
– Selectable force units [g, kg, lbf, oz, N]
– Store 128 tests each for COF, Peel and Tensile
– Heated Platen for testing at elevated temperatures up to 400° F (option)
– Available test area 225mm x 350mm
– Electronic over travel switches
– Preset industry-standard test method storage
ASTM D1894, D4521, D3330
TAPPI T816
ISO 8295
FP-2260