Brands
- AC
- ACA
- AMC
- Applied Test System
- Aro Scientific
- ASI Standard
- Cerulean
- Conidia
- Emcee
- Emco
- PAC
- PCS
- Phase Technology by PAC
- Pnshar
- PolyScience
- PulMac
- Regmed
- RISE
- Scavini
- Spectro Scientific
- Sundy
- Thwing Albert
- Tobias
- USON
- Vived Management JB
- Zematra
Standard and Low Pressure Manual Densometers
Densometers are the accepted standard for measuring the porosity of materials such as papers, wovens, plastics and membranes. All Densometers measure the time required for a given volume and of air (25cc to 400cc) to flow through a standard area of material being tested under light uniform pressure.
– The densometer test measures the time required for a given volume of air to flow through a standard area of material under uniform light pressure
– Test Filters, porous bags & materials where controlled porosity is essential
– Test insulating materials for air resistance.
– Control the selection of materials with the correct degree of liquid absorption (ink, varnish, sizing).
– The sample material is held between clamping plates having a circular orifice area of 1.0 (standard), 0.25 or 0.1 square inch (optional).
TAPPI T460
ISO 5636-5
ASTM D726-58
4110N
– The densometer test measures the time required for a given volume of air to flow through a standard area of material under uniform light pressure
– Test Filters, porous bags & materials where controlled porosity is essential
– Test insulating materials for air resistance.
– Control the selection of materials with the correct degree of liquid absorption (ink, varnish, sizing).
– The sample material is held between clamping plates having a circular orifice area of 1.0 (standard), 0.25 or 0.1 square inch (optional).
TAPPI T460
ISO 5636-5
ASTM D726-58
4110N
