Brands
- AC
- ACA
- AMC
- Applied Test System
- Aro Scientific
- ASI Standard
- Cerulean
- Conidia
- Emcee
- Emco
- PAC
- PCS
- Phase Technology by PAC
- Pnshar
- PolyScience
- PulMac
- Regmed
- RISE
- Scavini
- Spectro Scientific
- Sundy
- Thwing Albert
- Tobias
- USON
- Vived Management JB
- Zematra
Short spann compression tester
The strength characteristic of corrugated board raw paper is an important factor for judging the compliance of the finished product as a container. This compression tester is Short span test method. The sample is prepared width 15mm and 70mm length. The span between clamps is 0.7mm. The result is calculated to the compressive strength in kN/min. It will calculate the compression index with the grammage in g/m2.
– Specimen size 15mm×70mm
– Measurement range 100 to 700g/m2（ISO 100 to 400g/m2）
– Load detection: Load cell max 300N
– Clamp pressure 2,300±500N （when air source pressure 0.5MPa） adjustable
– Measuring span: 0.7±0.05mm
– Pressurization speed: 3±1mm/min.
– Operation: Touch panel
– The result is calculated tp the compressive strength in kN/min. It will calculate the compression index with the grammage in g/m2
– Air source 3±1mm/min.
ISO 9895
JIS P-8156
2093
– Specimen size 15mm×70mm
– Measurement range 100 to 700g/m2（ISO 100 to 400g/m2）
– Load detection: Load cell max 300N
– Clamp pressure 2,300±500N （when air source pressure 0.5MPa） adjustable
– Measuring span: 0.7±0.05mm
– Pressurization speed: 3±1mm/min.
– Operation: Touch panel
– The result is calculated tp the compressive strength in kN/min. It will calculate the compression index with the grammage in g/m2
– Air source 3±1mm/min.
ISO 9895
JIS P-8156
2093
