House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
" YOUR RELIABLE PARTNER
FOR QUALITY CONTROL SOLUTION "

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.

 

Vantage Series Tensile Tester

The Thwing-Albert EJA Vantage testing system provides maximum testing flexibility in a compact frame, only 250 mm (10 in) wide.

Four frames are available providing capacities from 1 kN (225 lbs) to 10 kN (2,280 lbs) of tension/compression force. All of the frames fully integrate system electronics and software controls eliminating the complications of interfacing with external control boxes or additional PC cards.

Available Capacities: 1kN, 2kN, 5kN, 10kN (dual screw frame)

Applicable Standards: ASTM E 4, D 822, D 882, ISO 1924-2, TAPPI T 494 and etc.

  


QC-3A Universal Materials Tensile Tester

The QC-3A upholds the standards of the QC line while adding the functionality of a RS-232 interface, a digital load controller and enhanced software. Ideal for tensile, compression, coefficient of friction and peel analysis, the QC-3A is an extremely flexible, cost-effective testing system.

The singlescrew frame provides up to 1100 lbs (5 kN/500kg) tensile force with extremely accurate control throughout the entire load range. The digital load
controller ensures extremely accurate, reliable test data.

Applicable Standards: ASTM E 4, D 822, D 882, ISO 1924-2, TAPPI T 494 and etc.

   





Inkometer 1100 Electronic Ink Tester

The Inkometer 1100 measures the apparent tack of printing inks under conditions that closely approximate the dynamic conditions of the ink-distribution system of a printing press during printing.

Featuring a new keypad and multi-line display the Inkometer 1100's intuitive interface streamlines operation for exceptional ease of use. The new design embodies Thwing-Albert's continuing attention to customer needs. The Inkometer 1100 provides advanced features such as test method storage, statistical reporting and data exporting, providing the tools to the testing lab that increase productivity in the printing and ink development industries.

In addition to four pre-defined ASTM D-4361 based test methods, the Inkometer 1100 allows for storage of five user definable methods. Methods include specification for distribution roller speed, distribution time, testing roller speed, testing time and sampling rate. The Inkometer 1100 stores up to 180 tack readings per test. Tack readings can also be transmitted via the RS-232 port or exported to a USB flash drive.

Applicable Standards: ASTM D 4361

    






FP-2260 Friction/Peel Tester

This Coefficient of Friction Tester (COF) / Peel Tester can measure static and kinetic coefficient of friction as well as run seal strength tests, 180° peel, 90° peel, and T-peel tests. The FP-2260 also offers a tensile test mode to perform lightweight tensile tests up to 10 kg (22 lbf).

Its small bench top design makes the FP-2260 light weight allowing it to be used in a laboratory or setup out on the production floor for offline testing as needed.

Plastic film, paper, paperboard, adhesives, labels and packaging materials are ideally tested with the FP-2260.

Applicable Standards: ASTM D 1894, D 4521, D2534, D 3330, F 88, ISO 8295 etc.

    


ProGage Thickness Tester

The ProGage utilizes the most advanced technology to quickly and accurately measure the thickness of sheeted materials such as paper, plastic film, tissue and toweling, nonwovens,
and textiles. The ProGage features a dual speed pressure foot which enables it to perform up to 20 test cycles per minute (based on configuration) while maintaining a high degree of
accuracy. The anvil design ensures excellent parallelism as well as zero stability and calibration.
A wide range of selectable presets for the measuring of speed distance and the pressure foot speed, as well as pressure feet diameters and weights, enables the unit to be configured to meet a specific test standard.

Capable of continuous or single testing with statistical analysis that is automatically performed. Average, high, low and standard deviation are computed, displayed and can be
printed.

The ProGage can operate in conjunction with other instruments or be controlled remotely through a computer terminal via a RS-232 port.

Applicable Standards: ASTM D374, D1777, D645, D6988, TAPPI T 411, CPPA D.4, BS 3983, 4817, ISO 3034,4593,12625-3 EN 20534, SCAN P7, P31, DIN 53105, EDANA 30.4-89

  

ProTear Elmendorf Tear Tester

Three models are available: the Electronic ProTear, the Mechanical ProTear and the
Heavy-Duty ProTear, which ensures you get the instrument ideal for your application and budget.

The ProTear Tester offers several capacity configurations ranging from 200 to 25,600 grams. Capacities can be changed quickly and easily with augmenting weights.

This configuration eliminates the necessity of multiple pendulums and simplifies the testing of different material.

Applicable Standards: ASTM D 295, D 752, D 1424, D 1922, D 5734, TAPPI T 414, T 496, BS 4253, 4468, CPPA D.9, DIN 53862, 53128, ISO 1974, 9290, EN 21974, SCAN P11


   


1270 PCA Score Bend & Opening Force Tester

The 1270 PCA measures the force to open or bend paperboard and scored paper carton. Force data is vital for accurately configuring machinery that controls cartons on form, fill and seal lines and to analyze carton performance for runnability and quality control.

  • Opening Force — Measures the maximum force required to open a flat folded carton along score lines.
  • Bending Force — An optional bending fixture measures the maximum force to bend a carton sample up to 90 C. Measure bending stiffness, score ratio of scored vs unscored paperboard and carton fold springback force.
  • Coefficient of Friction (COF) — Model 1270 PCA includes necessary software to measure static and kinetic coefficient of friction.

Applicable Standards: TAPPI T 577

  






JDC Sample Cutter

Thwing-Albert's JDC Sample Cutter is the industry standard for preparing samples for Tensile Testing. Dual-blade cutting action gives you clean, accurate cuts for paper, paperboard, plastic, film, rubber, textiles, nonwovens, metal foils and other sheet materials up to 16" x 3". .

The JDC-1"-10" is our most popular model, but other popular sizes are as follows: JDC-15mm-10", JDC-.5"-10", JDC-25mm-10", JDC-2"-10", JDC-3"-10", JDC-1"-12", JDC-3"-12", and JDC-1"-16". Other sizes are available and custom sized cutters are available upon request.

    
    
    


Pneumatic Alfa Sample Cutter

• Alfa cutters utilize interchangeable steel rule dies. Available in almost any size and shape (limited by linear inches). The dies are purchased separately.

• There are 2 models: 240-7B Pneumatic (44 linear in.), and 240-10 ElectroHydraulic (48 linear in.).

    


Electro-Hydraulic Alfa Sample Cutter

The Electro-Hydraulic Alfa Cutter is capable of exerting tremendous pressure obtained from the hydraulic system. It is ideal for preparing larger samples from heavier sheet materials. Dual test buttons are spaced to ensure maximum operator safety.

    


MTT Strip Cutter

This manual strip cutter quickly prepares samples 1 inch (25.4 mm) wide for measuring material tensile or seal strength. Its sturdy mechanical design ensures the preparation of accurate test samples, critical for ensuring the integrity of your test data.

It is equipped with a safety locking system that shields the blades while not being used to prepare samples.

   


Strip Cutter

This manual cutter quickly prepares up to 10 samples with one step. Ideal for film, paper, foil and other thin materials. It cuts rectangular strips in lengths of 230 mm and widths of 10 mm, 15 mm, 25 mm, or 1 inch (custom widths available).



   


Circular Sample Cutter (PS10)

This manual circular sample cutter quickly prepares samples used for determining basis weight of sheet materials including paper, textiles, and plastic films.
The sample is cut by simply turning the handle 90º. A locking mechanism ensures the safety of the operator. The cutter comes complete with cutting pads and spare blades.

 

Cutter Area: 10 cm2



  


Circular Sample Cutter (175B)

Serving the testing industry for over a century, Thwing-Albert is committed to providing the best possible solution for any application.This Circular Sample Cutter quickly prepares samples used for determining basis weight of sheet materials including paper, textiles, and plastic films.

The sample is cut by simply turning the handle 90°.  A locking mechanism ensures the safety of the operator. 

The cutter come complete with cutting pads and spare blades.

Cutter Area:  100 cm2

  


 

4340 Gurley Automatic Densometer & Smoothness Tester

  • Densometers are the accepted instruments for measuring porosity, air-permeability or air resistance of sheet-like materials.
  • The 4340 combines the ability of a low, standard and high pressure densometer and smoothness tester and provides a reading in seconds.
  • An auto-drive mechanism enables the user to program the number of tests and the span they are tested over.

The Model 4340 Automatic Densometer & Smoothness Tester measures the porosity, air-permeability or air resistance of sheet-like materials. It combines the abilities of a low, standard and high pressure tester with a digital timer that provides a reading in seconds.

An auto-drive mechanism, enables you to program the number of tests as well as the span they are tested over.

Therefore, a sheet or strip of paper can be analyzed automatically.

    


AKUSTRON Air Permeability

AKUSTRON measures the air permeability of filter papers, nonwovens and textile fabrics within seconds.

Easily transportable, this unit is ideal for monitoring material on the production line, inspecting incoming material on-site and on-going quality control in the lab.

Constructed of the most rugged materials, the AKUSTRON withstands the demands of constant usage.

    


PGX+ Contact Angle Tester

The PGX+ is a compact, video-based instrument that measures the wetting and absorption of virtually any size or shape surface without the need to prepare sample strips.

Eliminating the need to cut your material makes it ideal for any product that is difficult to cut such as rigid components, drywall board, glass or the inside of a container.

It also performs nondestructive testing so can be used on expensive materials without damage.

Testing with the PGX+ is effortless. Simply place the unit on top of the sample and press the PUMP button.

The instrument automatically pumps out a droplet, captures the liquid/substrate interaction and graphs the results.

    


TASL-1 Heat Sealer

Precision Laboratory Heat Sealer on an open back frame with upper and lower heated jaws, each independently controlled, featuring a digital timer and temperature controller, surface mounted thermocouples, dual action cylinders, electronic timer activation.

The standard instrument includes one set of 1" wide flat dies (one upper die and one lower die).

Available Options: Power Options: 110 V, 60 Hz or 220 V Serrated Sealing Dies (1" width only) matched sets for upper and lower jaws are available with options for both type and direction of serrations:Coarse serrations (6.5 serrations/inch) Fine serrations (20 serrations/inch) Crosswise (perpendicular to 12" length) Lengthwise (parallel to 12" length) Available flat surface die widths 1/8", 1/4", 3/8", 1/2", and 1"

    

TAS-1 Heat Sealer

Precision Heat Sealer on an open-back frame featuring a digital timer and temperature controller, surface mounted thermocouple, dual action cylinders, electronic timer activation.

The open-back frame allows for both front-to-back and lateral pass-thru capabilities.

The standard instrument includes one flat upper sealing die 1" wide. Available Options: Power Options: 110 V, 60 Hz or 220 V Serrated Sealing Dies (1" width only) are available with options for both type and direction of serrations.

Coarse serrations (6.5 serrations/inch) Fine serrations (20 serrations/inch) Crosswise (perpendicular to 12" length) Lengthwise (parallel to 12" length) Available flat surface die widths 1/8", 1/4", 3/8", 1/2", and 1"

    


House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
SERVICE DATA ACQUISITION CONDITIONAL ROOM ACCESSORIES

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
........................................................................................................................................................................................................................................................................................................................
DOWNLOAD
E-BROCHURE l MAP
Copyright 2003-2012 © Chemical House& Lab Instrument Co.,Ltd   98 Ramkhamheang 21 Rd (Soi Navasri), Phlabphla, Wangthonglang, Bangkok, 10310
Tel :+66 2 184 4000  Fax: +66 2 184 4006 or 314 0489