House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
" YOUR RELIABLE PARTNER
FOR QUALITY CONTROL SOLUTION "

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.



Vantage Series Tensile Tester

The Thwing-Albert EJA Vantage testing system provides maximum testing flexibility in a compact frame, only 250 mm (10 in) wide.

Four frames are available providing capacities from 1 kN (225 lbs) to 10 kN (2,280 lbs) of tension/compression force. All of the frames fully integrate system electronics and software controls eliminating the complications of interfacing with external control boxes or additional PC cards.

Available Capacities: 1kN, 2kN, 5kN, 10kN (dual screw frame)

Applicable Standards: ASTM E 4, D 822, D 882, ISO 1924-2, TAPPI T 494 and etc.

  

QC-3A Universal Materials Tensile Tester

The QC-3A upholds the standards of the QC line while adding the functionality of a RS-232 interface, a digital load controller and enhanced software. Ideal for tensile, compression, coefficient of friction and peel analysis, the QC-3A is an extremely flexible, cost-effective testing system.

The singlescrew frame provides up to 1100 lbs (5 kN/500kg) tensile force with extremely accurate control throughout the entire load range. The digital load
controller ensures extremely accurate, reliable test data.

Applicable Standards: ASTM E 4, D 822, D 882, ISO 1924-2, TAPPI T 494 and etc.

   





Inkometer 1100 Electronic Ink Tester

The Inkometer 1100 measures the apparent tack of printing inks under conditions that closely approximate the dynamic conditions of the ink-distribution system of a printing press during printing.

Featuring a new keypad and multi-line display the Inkometer 1100's intuitive interface streamlines operation for exceptional ease of use. The new design embodies Thwing-Albert's continuing attention to customer needs. The Inkometer 1100 provides advanced features such as test method storage, statistical reporting and data exporting, providing the tools to the testing lab that increase productivity in the printing and ink development industries.

In addition to four pre-defined ASTM D-4361 based test methods, the Inkometer 1100 allows for storage of five user definable methods. Methods include specification for distribution roller speed, distribution time, testing roller speed, testing time and sampling rate. The Inkometer 1100 stores up to 180 tack readings per test. Tack readings can also be transmitted via the RS-232 port or exported to a USB flash drive.

Applicable Standards: ASTM D 4361

    






FP-2260 Friction/Peel Tester

This Coefficient of Friction Tester (COF) / Peel Tester can measure static and kinetic coefficient of friction as well as run seal strength tests, 180° peel, 90° peel, and T-peel tests. The FP-2260 also offers a tensile test mode to perform lightweight tensile tests up to 10 kg (22 lbf).

Its small bench top design makes the FP-2260 light weight allowing it to be used in a laboratory or setup out on the production floor for offline testing as needed.

Plastic film, paper, paperboard, adhesives, labels and packaging materials are ideally tested with the FP-2260.

Applicable Standards: ASTM D 1894, D 4521, D2534, D 3330, F 88, ISO 8295 etc.

    


ProGage Thickness Tester

The ProGage utilizes the most advanced technology to quickly and accurately measure the thickness of sheeted materials such as paper, plastic film, tissue and toweling, nonwovens,
and textiles. The ProGage features a dual speed pressure foot which enables it to perform up to 20 test cycles per minute (based on configuration) while maintaining a high degree of
accuracy. The anvil design ensures excellent parallelism as well as zero stability and calibration.
A wide range of selectable presets for the measuring of speed distance and the pressure foot speed, as well as pressure feet diameters and weights, enables the unit to be configured to meet a specific test standard.

Capable of continuous or single testing with statistical analysis that is automatically performed. Average, high, low and standard deviation are computed, displayed and can be
printed.

The ProGage can operate in conjunction with other instruments or be controlled remotely through a computer terminal via a RS-232 port.

Applicable Standards: ASTM D374, D1777, D645, D6988, TAPPI T 411, CPPA D.4, BS 3983, 4817, ISO 3034,4593,12625-3 EN 20534, SCAN P7, P31, DIN 53105, EDANA 30.4-89

  

ProTear Elmendorf Tear Tester

Three models are available: the Electronic ProTear, the Mechanical ProTear and the
Heavy-Duty ProTear, which ensures you get the instrument ideal for your application and budget.

The ProTear Tester offers several capacity configurations ranging from 200 to 25,600 grams. Capacities can be changed quickly and easily with augmenting weights.

This configuration eliminates the necessity of multiple pendulums and simplifies the testing of different material.

Applicable Standards: ASTM D 295, D 752, D 1424, D 1922, D 5734, TAPPI T 414, T 496, BS 4253, 4468, CPPA D.9, DIN 53862, 53128, ISO 1974, 9290, EN 21974, SCAN P11


   


1270 PCA Score Bend & Opening Force Tester

The 1270 PCA measures the force to open or bend paperboard and scored paper carton. Force data is vital for accurately configuring machinery that controls cartons on form, fill and seal lines and to analyze carton performance for runnability and quality control.

  • Opening Force — Measures the maximum force required to open a flat folded carton along score lines.
  • Bending Force — An optional bending fixture measures the maximum force to bend a carton sample up to 90 C. Measure bending stiffness, score ratio of scored vs unscored paperboard and carton fold springback force.
  • Coefficient of Friction (COF) — Model 1270 PCA includes necessary software to measure static and kinetic coefficient of friction.

Applicable Standards: TAPPI T 577

    






JDC Sample Cutter

Thwing-Albert's JDC Sample Cutter is the industry standard for preparing samples for Tensile Testing. Dual-blade cutting action gives you clean, accurate cuts for paper, paperboard, plastic, film, rubber, textiles, nonwovens, metal foils and other sheet materials up to 16" x 3". .

The JDC-1"-10" is our most popular model, but other popular sizes are as follows: JDC-15mm-10", JDC-.5"-10", JDC-25mm-10", JDC-2"-10", JDC-3"-10", JDC-1"-12", JDC-3"-12", and JDC-1"-16". Other sizes are available and custom sized cutters are available upon request.

    
    
    


Pneumatic Alfa Sample Cutter

Alfa cutters utilize interchangeable steel rule dies.
Available in almost any size and shape (limited by linear inches).
The dies are purchased separately.

There are 2 models:
240-7B Pneumatic (44 linear in.), and
240-10 ElectroHydraulic (48 linear in.).

    


Electro-Hydraulic Alfa Sample Cutter

The Electro-Hydraulic Alfa Cutter is capable of exerting tremendous pressure obtained from the hydraulic system. It is ideal for preparing larger samples from heavier sheet materials. Dual test buttons are spaced to ensure maximum operator safety.

    


MTT Strip Cutter

This manual strip cutter quickly prepares samples 1 inch (25.4 mm) wide for measuring material tensile or seal strength. Its sturdy mechanical design ensures the preparation of accurate test samples, critical for ensuring the integrity of your test data.

It is equipped with a safety locking system that shields the blades while not being used to prepare samples.

   


Dart Drop Impact Tester

from Thwing-Albert the dart drop tester is an easy-to-use, ergonomically designed instrument used to measure the impact resistance of plastic film, coated paper and other materials utilizing the free falling dart method.The dart drop tester is an easy-to-use, ergonomically designed instrument used to measure the impact resistance of plastic film, coated paper and other
materials utilizing the free falling dart method.

   


Strip Cutter

This manual cutter quickly prepares up to 10 samples with one step. Ideal for film, paper, foil and other thin materials. It cuts rectangular strips in lengths of 230 mm and widths of 10 mm, 15 mm, 25 mm, or 1 inch (custom widths available).



   

EZ-Cup Vapometer Permeability Cup for SAE J2665

Thwing-Albert offers a EZ-Cup Vapometer package to meet the industry standard SAE J2655 Test Procedure to Measure the Fuel Permeability of Materials by the Cup Weight Loss Method.
The Vapometer includes the following:

  • (Qty 1) Standard EZ-Cup Vapometer Cup Model 68-3000 with 2.5" Inside Diameter X 2" Deep
  • (Qty 1) Gasket 3" Outside Diameter, 2.5" Inside Diameter x .031" Thick
  • (Qty 1) Gasket 3" Outside Diameter, 2.5" Inside Diameter x .062" Thick
  • (Qty 1) Wire Mesh Screen
  • (Qty 1) Top Teflon Ring
The new EZ-Cup Vapometer does not require the tightening of individual screws using a torque wrench.

   


QuickPeek Color Proofing Kit

A QuickPeek consists of a compact kit housed in a sturdy wooden case. (Note: Roller Assembly sold separately) It can quickly produce a proof that replicates how ink will appear on a printed copy from the press.

The kit consists of: a smooth flat plate, a steel measuring bar and plunger for obtaining an accurate predetermined volume of ink, a steel spatula for filling the measuring bar and pipe cleaners for cleaning the holes in the measuring bar.

The roller assembly, sold separately [Part # 116-0022], consists of a nitrile pvc blend roller that will work with conventional, hybrid, and UV inks.

The roller is used to distribute the ink on the plate and make a proof.

  

4171 Bending Stiffness Testers

Digital bending resistance/stiffness tester with parallel clamp.

  • The bending resistance/stiffness testers measure the force required to bend a wide variety of materials under controlled and repeatable conditions.
  • This force may be equated to stiffness, resilience, flexibility or pliability, depending on the nature of the material and purpose of test.
  • There are 15 possible specimen sizes and an unlimited range of thicknesses up to 6 mm.

All genuine Gurley%u2122 bending resistance/stiffness testers measure the force required to bend a wide variety of materials under controlled and repeatable conditions.

This force may be equated to stiffness, resilience, flexibility or pliability, depending on the nature of the material and purpose of test. There are 15 possible specimen sizes and an unlimited range of thicknesses up to 6 mm.

A complete set of accessory weights (5, 25, 50 and200 grams) as well as a calibration strip, are included as standard.

Operation

A sample of a specific size is attached to a clamp. A driving gear aligns the sample 15

  


Circular Sample Cutter (PS10)

This manual circular sample cutter quickly prepares samples used for determining basis weight of sheet materials including paper, textiles, and plastic films.
The sample is cut by simply turning the handle 90º. A locking mechanism ensures the safety of the operator. The cutter comes complete with cutting pads and spare blades.

 

Cutter Area: 10 cm2



  


Circular Sample Cutter (175B)

Serving the testing industry for over a century, Thwing-Albert is committed to providing the best possible solution for any application.This Circular Sample Cutter quickly prepares samples used for determining basis weight of sheet materials including paper, textiles, and plastic films.

The sample is cut by simply turning the handle 90°.  A locking mechanism ensures the safety of the operator. 

The cutter come complete with cutting pads and spare blades.

Cutter Area:  100 cm2

  


Basis Weight Scale (7500-2)

Paper Ream Calculations with Speed And Accuracy
Designed for the graphic arts and paper industries.

  • Choose weight or the weight of a 480, 500 or 1,000 sheet ream at the press of a button.
  • Bright, easy to read LED display.
  • Rugged Construction for many years of accurate weighing performance.
  • 4 Year Warranty
  • In 2 lb. to 200 lb. capacities

The 7500 is designed for counting, weighing and calculating reams for 3000 or 3300 at the press of a button.


    


 

4340 Gurley Automatic Densometer & Smoothness Tester

  • Densometers are the accepted instruments for measuring porosity, air-permeability or air resistance of sheet-like materials.
  • The 4340 combines the ability of a low, standard and high pressure densometer and smoothness tester and provides a reading in seconds.
  • An auto-drive mechanism enables the user to program the number of tests and the span they are tested over.

The Model 4340 Automatic Densometer & Smoothness Tester measures the porosity, air-permeability or air resistance of sheet-like materials. It combines the abilities of a low, standard and high pressure tester with a digital timer that provides a reading in seconds.

An auto-drive mechanism, enables you to program the number of tests as well as the span they are tested over.

Therefore, a sheet or strip of paper can be analyzed automatically.

    


GURLEY™ Cobb Sizing Testers

GURLEY™ Cobb Sizing Testers have been manufactured by Gurley for over a half-century Represent an economical and practical means of determining liquid absorptiveness or resilience of treated and untreated papers, boards, fabrics and other sheet materials.

    


 

Gurley High Pressure Densometer with Weighted Arm Assembly
  • High Pressure Densometers are the accepted standard for measuring the porosity, air-permeability or air-resistance of materials having low permeability.
  • Typical materials include coated papers, plastics and membranes.
  • High Pressure units are recommended whenever a standard unit would yield excessive measurement times.
  • Manual and automatic units available. Conform to TAPPI T-536-88 and ASTM D-726-58, Method B.

  


 

Gurley Permeometers

  • The Gurley Model 4301 Permeometer measures the porosity or air-permeability of materials where air flow is an important characteristic relative to their use.
  • These materials might be non-woven or woven textiles, filter and cloth felts, some types of blotting, saturating and absorbent bag papers as well as meshes.
Conform to TAPPI T-251, ASTM D-737, DATM 70.0-70 and ISO 5636/1.

  

 

Gurley Standard and Low Pressure Densometers

  • Densometers are the accepted standard for measuring the porosity of materials such as papers, wovens, plastics and membranes.
  • All Densometers measure the time required for a given volume and of air (25cc to 400cc) to flow through a standard area of material being tested under light uniform pressure.
  • Certain models, such as the S-P-S Tester, are also used to measure surface smoothness and material softness.
Manual and automatic units available. Conform to TAPPI T-460, ASTM D-726-58 & APPITA/AS 1301-420, BS 5926, CPPA D-14, ISO 5636/5, D-202-77, SCAN P-19 & P-53.

   

AKUSTRON Air Permeability

AKUSTRON measures the air permeability of filter papers, nonwovens and textile fabrics within seconds.

Easily transportable, this unit is ideal for monitoring material on the production line, inspecting incoming material on-site and on-going quality control in the lab.

Constructed of the most rugged materials, the AKUSTRON withstands the demands of constant usage.

    


PGX+ Contact Angle Tester

The PGX+ is a compact, video-based instrument that measures the wetting and absorption of virtually any size or shape surface without the need to prepare sample strips.

Eliminating the need to cut your material makes it ideal for any product that is difficult to cut such as rigid components, drywall board, glass or the inside of a container.

It also performs nondestructive testing so can be used on expensive materials without damage.

Testing with the PGX+ is effortless. Simply place the unit on top of the sample and press the PUMP button.

The instrument automatically pumps out a droplet, captures the liquid/substrate interaction and graphs the results.

    


TASL-1 Heat Sealer

Precision Laboratory Heat Sealer on an open back frame with upper and lower heated jaws, each independently controlled, featuring a digital timer and temperature controller, surface mounted thermocouples, dual action cylinders, electronic timer activation.

The standard instrument includes one set of 1" wide flat dies (one upper die and one lower die).

Available Options: Power Options: 110 V, 60 Hz or 220 V Serrated Sealing Dies (1" width only) matched sets for upper and lower jaws are available with options for both type and direction of serrations:Coarse serrations (6.5 serrations/inch) Fine serrations (20 serrations/inch) Crosswise (perpendicular to 12" length) Lengthwise (parallel to 12" length) Available flat surface die widths 1/8", 1/4", 3/8", 1/2", and 1"

    

TAS-1 Heat Sealer

Precision Heat Sealer on an open-back frame featuring a digital timer and temperature controller, surface mounted thermocouple, dual action cylinders, electronic timer activation.

The open-back frame allows for both front-to-back and lateral pass-thru capabilities.

The standard instrument includes one flat upper sealing die 1" wide. Available Options: Power Options: 110 V, 60 Hz or 220 V Serrated Sealing Dies (1" width only) are available with options for both type and direction of serrations.

Coarse serrations (6.5 serrations/inch) Fine serrations (20 serrations/inch) Crosswise (perpendicular to 12" length) Lengthwise (parallel to 12" length) Available flat surface die widths 1/8", 1/4", 3/8", 1/2", and 1"

    


House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
SERVICE DATA ACQUISITION CONDITIONAL ROOM ACCESSORIES

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
........................................................................................................................................................................................................................................................................................................................
DOWNLOAD
E-BROCHURE l MAP
Copyright 2003-2012 © Chemical House& Lab Instrument Co.,Ltd   98 Ramkhamheang 21 Rd (Soi Navasri), Phlabphla, Wangthonglang, Bangkok, 10310
Tel :+66 2 184 4000  Fax: +66 2 184 4006 or 314 0489