House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
" YOUR RELIABLE PARTNER
FOR QUALITY CONTROL SOLUTION "

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.


LABORATORY CHIP CLASSIFICATOR model CC-21

The laboratory Chip Classificator model CC-21 has been designed for
accurate classification of wood chips, important characteristic for
success of the pulping process.

Applicable Standards: SCAN-CM 40:01 • TAPPI UM-21

    


LABORATORY DIGESTER models AU/E-20

The laboratory digester AU-E/20 is used for chemical, semi-chemical,
thermal and bleaching pulping studies in the pulp and paper industries.

Applicable Standards: -

  

 

LABORATORY REACTOR model HB-21

The laboratory reactor model HB-21 has been designed for pilot
chemical, semi-chemical and thermal pre-treatments of several types of
biomass .Unique patented rotative vessel design ensures perfect mixing andhomogeneous reaction.


Applicable Standards:

  

 

LABORATORY SCREEN TYPE SOMERVILLE
model SM-21

The SM-21 is a Somerville type Laboratory Screen, used worldwide for
separating contaminants, such as shives, stickies, flakes and particles,
from a pulp slurry.

Applicable Standards: TAPPI T-275

  


PNEUMATIC CANADIAN FREENESS
model CF-21

The Canadian Freeness is used worldwide for determination of the drainability of pulp suspensions.

The drainability is the measurable index of the efficiency of refining process.

The refining of pulps is one of the most important stages in the paper production process and because it consumes much energy and influences strongly the sheet forming and its physical properties.

Applicable to all kind of pulps in aqueous suspension.

Applicable Standards: ISO 5267/2 • TAPPI T-227 • SCAN C21/65

   


FIBER CLASSIFIER BRECHT & HOLL Type
model BH-6/12

The fiber classificator is used for the separation of pulps into fines, shives and useful fibers fractions.
The size of pulp fibers influences the mechanical properties and in the quality of paper and board.

Applicable Standards: Merkblatt Nr. VI/1/66

    


 

DISINTEGRATOR
model DSG-21

The Disintegrator model DSG-21 is an equipment indispensable for the laboratory wet desintegration of pulp and the correct preparation of pulp suspensions.

This preparation is a key point for the determination of refining efficiency according to the Schopper-Riegler and Canadian Freeness methods, and for the preparation of laboratory sheets for physical
testing according to the Conventional and Rapid-Köthen methods.

Its Standard design allows to separate again interlaced fibres which were free in the pulp stock without appreciably changing their structural properties.

Applicable Standards: ISO 5263-1 • ISO 5263-2 • TAPPI T-205


   


LATENCY REMOVAL DEVICE
model DSG-DL

The DSG-DL is a device for the DSG-2000 Standard Pulp Disintegrator which enables the removal of latency of all kind of mechanical, semimechanical and chemimechanical pulps exhibiting latency.

Its standard disintegration container with the characteristic internal spiral baffles can be heated up to 90°C enabling the preparation of pulp suspensions adequate for further regular use in the wet laboratory such
as determination of freeness and preparation of handsheets.

Applicable Standards
: ISO 5263-3



  


DISTRIBUTOR
model D-150

The D-150 is indispensable for the correct preparation of pulp suspensions to be used in the determination of refining degree according to the Schopper-Riegler and Canadian Freeness methods, and to be used in the preparation laboratory sheets for physical testing according to the Conventional and Rapid-Köthen methods.

It keeps homogeneously mixed pulp suspensions of already properly disintegrated fibres avoiding sedimentation and without causing anychanges in their structural properties.

Applicable Standards: Merkblatt Nr. V/6/61

    


 

LABORATORY PULP FLUFFER
model PF-21

The PF-21 is a high performance laboratory pulp fluffer which producesfluffed pulp, quickly and with high repeatability and reproducibility, for further use for chemical & physical routine tests for Q.C. and for R&D.

The chips of pre-wetted pulp are inserted in the top funnel, which guides them into the in-line fluffing rotor. Running at high speed with highinertia the fluffing rotor and its round bars fluffs instantaneously and
homogeneously the flow of pulp chips. The fluffed pulp is accumulated in the large lower container.

Applicable Standards:

   


 

CONVENTIONAL LABORATORY SHEET FORMER
model FQ-21

The FQ-21 is a manual laboratory sheet former used for the production of standard square laboratory sheets for physical and optical testing.

The sheet is formed from a pulp suspension on a standard wire screen under suction generated by the flow of the water column.

This equipment became a standard for Q.C. (quality control ) and R&D ( research and development ) due to its sturdiness, precision, reliability and repeatability.

Applicable Standards: ISO 5269-1

  


 

 

SEMI-AUTOMATIC SHEET MOLD
model FD-21

The FD-21 is an all new semi-automatic laboratory sheet former used for the production of standard laboratory handsheets for physical and optical testing with full respect to modern performance and ergonomic
requirements.

The square sheet is formed from a pulp suspension on a standard wire screen gauze under suction generated by the flow of the water column.

Applicable Standards: TAPPI T-205

  



 

AUTOMATIC SHEET FORMER RAPID KÖTHEN METHOD
model SF-RK

The SF-RK is an automatic sheet former used for the production of laboratory sheets in accordance to the Rapid Köthen method for measurement of the physical and/or optical properties of pulps.

Applicable Standards: ISO 5269/2 • ISO 5269/3

    


LABORATORY BEATER TYPE HOLANDESA
model HV-10

The HV-10 is a laboratory beater used for pilot beating of pulps in the Q.C. (quality control) and R&D (research and development) of pulps.

Its high capacity and its sturdy design also allows its use in small production lines of special papers and boards.

The knives of the beating roll and the bedplate are stainless steel made and have adjustable contact pressure by means of integrated precise balance.

Applicable Standards: -

   

 

LABORATORY BEATER TYPE JOKRO
model JK-21

The JK-21 is a laboratory beater widely used for pilot beating of pulps in the Q.C. (quality control) and R&D (research and development) of pulps, papers and boards.

The JK-21 has six sets of beating units which are mounted in a horizontal revolving table that performs a planetary movement around the central shaft ensuring perfect homogenous beating of all samples.

Every set of beating unit consists of a beating box, a grooved roll and a lid, all made of hard bronze, offering to the user the necessary reliability and repeatability.

Applicable Standards: DIN 54360

   


LABORATORY BEATER TYPE VALLEY
model VB-21

The Laboratory Beater type Valley is used worldwide to beat with high repeatability and reproducibility pulps for Q.C. (Quality Control) and R&D (Research and Development).

This equipment beats succesfully most types of pulps, from hardwood short fibers like Eucalyptus to softwood long fibers like Pine.

Applicable Standards: ISO 5264/1 • TAPPI T-200

   


LABORATORY DISC REFINER TYPE BAUER
model MD-3000

The MD-3000 is a disc refiner widely used for pilot refining of pulps in the Q.C. (quality control) and R&D (research and development) of pulps, papers and boards.

Its high capacity and sturdiness allow customers to use it also as main refiner in small sized production lines of special papers.

Applicable Standards: -

   


SCHOPPER RIEGLER PNEUMATIC
model SR/P

The SR/P is used for the determination of drainability of pulp suspension in water.
The drainability is the measurable index of the refining degree of pulps.
The refining of pulps is one of the most important stages in the paper production process and influences strongly the sheet forming and its physical properties.

Applicable to all kinds of pulp in aqueous suspension.

Applicable Standards: • ISO 5267/1

   


LABORATORY SHEET DRYER TYPE RAPID KÖTHEN
model TD-RK

The TD-RK is a laboratory sheet dryer designed to be used along with any Rapid Köthen type Laboratory Sheet Former.

This newly designed dryer meets all specification of applicable standards and replaces traditional Rapid-Köthen drying stations saving laboratory space and maintenance costs.

Applicable Standards: • ISO 5269/2

   


PNEUMATIC SHEET PRESS FOR HANDSHEETS
model SP-21

Handsheets are fundamental for all laboratory physical tests for pulp and paper.
Handsheets are formed by the drainage of a pulp suspension through a forming wire screen gauze and must be pressed before being dried on air.

Applicable Standards: • ISO 5269/1 • TAPPI T-205


   

COBB TESTER
model COBB

The COBB method is used worldwide to determine the water absorptiveness of sized paper and board, including corrugated fiberboard under standard conditions.

The water absorptiveness is a very important and usefull parameter in the specification of paper and board for use in the packaging and printing industries.

Applicable Standards: ISO 535 • TAPPI T-441 • NM-ISO 535

    


DENSOMETER TYPE GURLEY
model PAG-1000

The air permeance of papers has a major importance in the specificationof materials for the packaging and printing industries.

The air permeance is the flow of air through unit area under unit pressure difference in unit time, under specified test conditions and is expressed in μ m/(Pa.s) .

This equipment is absolutely user friendly due to its built-in computer and exclusive testing software.

Applicable Standards: ISO 5636/5 • NM-ISO 5636/5 • TAPPI T-460

  

 

TENSILE TESTER
model DI-21

The DI-21 determines the tensile strength, stretch and TEA (tensile energy absorption) of paper and board for Q.C. (quality control) and R&D (research and development).

This equipment is absolutely user friendly and reliable due to its built-in exclusive testing software and its rugged and accurate mechanical construtction.

It offers complete statistics, a parallel port for the connection of a local printer and a RS232 serial port for the connection to a host computer fordata transfer.

Applicable Standards: ISO 5636/5 • NM-ISO 5636/5 • TAPPI T-460

  

 

PRECISION SAMPLE CUTTER
model 2G-15

The development and production of environment friendly papers and boards, with high performance and low cost, require constant R&D (research and development) and Q.C. (quality control).

The effective preparation of representative test pieces is a key point in paper and board physical tests that might not be forgotten by users.

Applicable Standards: -

  


ELECTRICINCINERATOR
model INCIN

The determination of residue (ash content) on ignintion at 900º C is worldwide used to determine the filler content in pulp, paper and board in the routines of Q.C. (Quality Control) of the production lines.

The sample is inserted in the ignition chamber, which is a furnace at o 900 C, where all organic content is burned, remaining only the inorganic components.

The comparison of the initial weight of the sample and the final weight of the residue with an analytic scale gives the percentage of residue.

Applicable Standards: -

   


FRICTION & PEEL TESTER HORIZONTAL PLANE METHOD
model MCA-2000

The MCA-2000 measures the static and kinetic coefficient of friction of paper, board, corrugated, paperboard, plastic films as well peel properties of adhesives and labels for the Q.C. (quality control) and R&D (research and development) tasks.

This equipment is absolutely user friendly and its operation can easily be done through its built-in testing software, alphanumeric backlighted display and membrane keyboard.

Applicable Standards: TAPPI T-549 • ASTM D 4917 ISO 8295• ASTM D 1894 TAPPI T-816 • ASTM D 3247 ASTM D-3330

    


 

MICROMETER
model ME-1000

The ME-1000 measures the exact thickness for the quality control and R&D of paper, tissue, board and corrugated board.

Applicable Standards: ISO 534 NM-ISO 534 TAPPI T-411 • ASTM D645 ISO 12625/3 ISO 3034


   


STIFFNESS TESTER
model RI-5000

The stiffness is a key property of boards used for the production of packages because it has a direct influence on all its further mechanical resistance characteristics and machinability.

The stiffness is also a very important property of papers because it has a direct influence on the maximal speed allowed on further conversion stages, like printing.

Applicable Standards: NM-ISO 2493 TAPPI T-489


   


INK RUB TESTER
model RAS-21

The Ink Rub Test is used worldwide to determine the abrasion resistance of materials and printed materials.

Abrasion resistance is a desirable and sometimes critical property of materials printed materials as damage can occur during shipment, storage, handling and end use.

Applicable Standards:
TAPPI T-830    ASTM D 5264

    


BURSTING STRENGTH TESTER
models BT-21P and BT-21C

The BT-21 determines the bursting strength for the quality control (QC) and research and development (R&D) of paper, board and corrugated board. The new and modern design, associated to the use of light and resistant materials, offers a friendly and secure operation to the user. The exclusive interactive and intuitive software offers options to a complete or basic test. The complete test presents options to statistical calculation, calculation of bursting strength, bursting index and absolute bursting strength. During the test the wide LCD display shows a graphic of the evolution of the test and after its conclusion indicates automatically the maximum strength of the tested material. Available also memory to storage of results, search function by date,

operator or material and thermal printer.

Applicable Standards: ISO 2758, TAPPI T-403(For paper) and ISO 2759, TAPPI T-807, TAPPI T-810(For board and corrugated board)

   


 

WATER VAPOUR TRANSMISSION TESTER
model PVA/4

The PVA/4 is designed for preparation of test pieces for the accurate measurement of the WVTR - Water Vapour Transmission Rate - of sheeted materials like paper, board, plastics, aluminum, rubber, etc.

The WVTR is the mass of water vapour transmitted through a unit area in a unit time under specified conditions of temperature and humidity.

2 Usually indicated in grams per square meter per day g/(m .d) the WVTR is a key characteristic used to specificate sheet materials in the packaging industry.

Applicable Standards: ISO 2528 • TAPPI T-448


  


House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
SERVICE DATA ACQUISITION CONDITIONAL ROOM ACCESSORIES

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
........................................................................................................................................................................................................................................................................................................................
DOWNLOAD
E-BROCHURE l MAP
Copyright 2003-2012 © Chemical House& Lab Instrument Co.,Ltd   98 Ramkhamheang 21 Rd (Soi Navasri), Phlabphla, Wangthonglang, Bangkok, 10310
Tel :+66 2 184 4000  Fax: +66 2 184 4006 or 314 0489