House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
" YOUR RELIABLE PARTNER
FOR QUALITY CONTROL SOLUTION "

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.

 


BOX CALIPER
model C-INT

The solid board and corrugated fibreboard packages meet the modern requirements of low cost, high performance, minimal environment impact and addition of value to the packed goods.

The internal dimensions of these packages are fundamental to the preservation of the goods wrapped during transportation, storage andhandling.

Applicable Standards: ASTM D2658-68


  


UNIVERSAL TESTER
model PU-2

The PU-2 is an universal tester for R&D (research & development) and Q.C. (quality control) of materials and products.

It performs tensile and compression tests with register of load and respective deformation.

Applicable Standards: -


  


PNEUMATIC SAMPLE CUTTER
model CAP-21

The development and production of environment friendly packaging, with high performance and low cost, require constant Q.C. (quality control) and R&D (research and development).

The effective preparation of representative test pieces is a key point for paper and board physical tests that might not be forgotten by users.

Applicable Standards: -

  


FRICTION & PEEL TESTER HORIZONTAL PLANE METHOD
model MCA-2000

The MCA-2000 measures the static and kinetic coefficient of friction of paper, board, corrugated, paperboard, plastic films as well peel properties of adhesives and labels for the Q.C. (quality control) and R&D (research and development) tasks.

This equipment is absolutely user friendly and its operation can easily be done through its built-in testing software, alphanumeric backlighted display and membrane keyboard.

Applicable Standards: TAPPI T-549 · ASTM D 4917 ISO 8295· ASTM D 1894 TAPPI T-816 · ASTM D 3247 ASTM D-3330



  

 


MICROMETER FOR PLASTIC FILMS
model ME-1000

Thickness is a key characteristic of plastic films.

This equipment is absolutely user friendly and its operation can be easily done trough its built-in software, alphanumeric backlighted display and membrane keyboard.

Motorized automatic cycling with programable interval time between
each test.

Applicable Standards: ASTM D374 and D2103


  


LABORATORY FLUTER
model LF-21

The LF-21 is used to prepare corrugated test pieces for CMTCorrugating

Medium Test and for CCT- Corrugated Crush Test. It flutes in the laboratory pre-cut (12,7 x 152,4) mm (1/2 x 6) inches sample stripes of medium.

Applicable Standards: ISO 7263 · TAPPI T-809

  


CRUSH TESTER
model CT-2000

The CT-2000 determines the compression strength of corrugated fibreboard and its components for Q.C. (quality control) and R&D (research and development).


Applicable Standards: ISO 13820

  


BOX COMPRESSION TESTER
model P-4000M

The P-4000M determines the crushing resistance of boxes and is used for both Quality Control and R&D.

It performs accurate BCT tests according to applicable technical standards ISO 12048 and TAPPI T-804.

Its design offers to the user a comfortable and safe operating position with an excellent 360 visibility of the sample that is being tested.

This equipment is absolutely user friendly and its operation can easily be done through its built-in testing software, alphanumeric LCD display and keyboard.

Applicable Standards: ISO 12048 · TAPPI T-804 · ASTM D 642 · ASTM D 4577.



  


BOX COMPRESSION TESTER
model P-6000M

The P-6000M has been designed to determine the crushing resistance of any corrugated boxes and is used for both Quality Control and R&D.

It performs accurate BCT tests according to applicable standards ISO 12048 and TAPPI T-804.

Crushing resistance is a key characteristic of the performance of corrugated boxes due to the high stress experienced during stacking and transportation; if the box collapses its contents may be damaged.

Applicable Standards: ISO 12048 · TAPPI T-804 · ASTM D 642 · ASTM D 4577.

  

 


BURSTING STRENGTH TESTER
models BT-21P and BT-21C

The BT-21 determines the bursting strength for the quality control (QC) and research and development (R&D) of paper, board and corrugated board. The new and modern design, associated to the use of light and resistant materials, offers a friendly and secure operation to the user. The exclusive interactive and intuitive software offers options to a complete or basic test. The complete test presents options to statistical calculation, calculation of bursting strength, bursting index and absolute bursting strength. During the test the wide LCD display shows a graphic of the evolution of the test and after its conclusion indicates automatically the maximum strength of the tested material. Available also memory to storage of results, search function by date,

operator or material and thermal printer.

Applicable Standards: ISO 2758, TAPPI T-403(For paper) and ISO 2759, TAPPI T-807, TAPPI T-810(For board and corrugated board)

   


PACKAGE SHAKER VIBRAMAX
model VMX-1100

The VMX-1100 is a small sized package shaker designed for the laboratory simulation of typical harzards present in distibution environment.

Its rigid platform with adjustable restraining fences moves in a 25.4 mm peak to peak vertical sinusoidal motion and applies a uniform vibration input over the entire test specimen.

The vibration frequency is linearly adjustable within the range of (2-5)Hz (120-300) rpm so user can test a package under its exact ressonancefrequency, achieving maximal destrutive performance in minimal test periods.

Applicable Standards: ISO 2247/B · ASTM D-999/A1

  

 


TORQUE TESTER
Model TT-170/A

The TT-170/A is used worldwide for the quick and precise determination of the effective torque required to open or close any kind of threaded lid.

This equipment has an outstanding reliability due to its combined high accuracy and rugged mechanical construction.

Over 1200 units delivered it the past 15 years confirm that this equipment became a standard for the Q.C. (quality control) of any bottling lines where threaded lids are used.

Applicable Standards: -

  

 


DIGITAL TORQUE TESTER
model TD-21

The TD-21 is designed for determining the precise torque required to open or close any kind of threaded lid.

Applicable Standards: -

  

 


VISCOSIMETER
model Stein-hall

The viscosimeter type STEIN HALL is worldwide used for the control of the viscosity of starch adhesives, widely used for the production of corrugated fibreboard.

Viscosity is a key property of starch adhesives because it is strictly related to the production and quality control of corrugated fibreboard.

Viscosity is directly related to the starch content, the water penetration, water retention, penetration, thack, film formation and transference to the fibreboard.

Applicable Standards: TAPPI TIP 0304-33

  

 


WATER RESISTANCE OF THE GLUE BOND OF CORRUGATED
model RC-21

The RC-21 determines the resistance of corrugated to withstand wet conditions by immersion in water.

This test method is applicable to all types of corrugated and in particular to corrugated types in which a high degree of resistance to wet conditions is required.

RC-21 tests simultaneously up to six test pieces with automatic time measurement for each test position and corresponding automatic registration of the exact time elapsed from start of test until failure of each test piece.

Applicable Standards: TAPPI TIP 0304-33

  

 


   





House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
SERVICE DATA ACQUISITION CONDITIONAL ROOM ACCESSORIES

House & Lab Instrument Co.,Ltd. Ventured into business almost three decades ago with one employee. Primarily the company was only involved in buying and selling re-agents (chemical) general laboratory instruments and all kind of glass wares. Today, with a present well-trained staff of 32, we have been able to expand and diversify our business into more specific areas of Petroleum/Petrochemical Industries ,Pulp-Paper-Packaging Industries and etc, supplying the Laboratory Analysis Instruments as an Exclusive Distributor of many leading manufacturers from all over the world.
........................................................................................................................................................................................................................................................................................................................
DOWNLOAD
E-BROCHURE l MAP
Copyright 2003-2012 © Chemical House& Lab Instrument Co.,Ltd   98 Ramkhamheang 21 Rd (Soi Navasri), Phlabphla, Wangthonglang, Bangkok, 10310
Tel :+66 2 184 4000  Fax: +66 2 184 4006 or 314 0489